Brake Hardware

Wilwood’s Pad Shim Kits feature a steel and elastomeric construction that dampens vibration transmitted between the rotor and pad. This is an indus...

Wilwood’s Pad Shim Kits feature a steel and elastomeric construction that dampens vibration transmitted between the rotor and pad. This is an indus...

Wheel Spacer and Hub Protector. With a wheel bolt circle of 5 x 4.00”/4.50”/4.75” and a .090 thickness. Engineered from high strength steel alloy a...

Caliper Bridge Spacer Kits contain bolts, bridge spacer and other hardware to convert Narrow Dynalite, Narrow Dynapro and Forged Narrow Dynalite Ca...

Caliper Bridge Spacer Kits contain bolts, bridge spacer and other hardware to convert Narrow Dynalite, Narrow Dynapro and Forged Narrow Dynalite Ca...

Caliper Bridge Spacer for Forged Dynalite / Billet Dynalite and NDL Calipers. Available in various thicknesses for .50” thru 1.25” rotor widths. Ma...

Caliper Piston Knock Back Springs. Used in low brake pedal situations due to piston knock back caused by vibration, mount or spindle flex. Part # ...

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 12 lug (7.77’ Snap Ring) Dynam...

Convenient set of four or part # 310-3634, CLIP,RETAINING,PIN for DP6, D8, TX6 and Aero calipers.

Wheel Spacer and Hub Protector. With a wheel bolt circle of 5 x 4.50”/4.75”/5.00” and a 5mm (0.197’) thickness. Engineered from high strength steel...

Caliper Rebuild Kit for Dynapro Single and Dynalite Single Calipers with 1.75” pistons. Contains piston seals, wear plates, bleed screws, pad retai...

Cable Clamp with neoprene cushion. Plated steel construction. And available in .312 and .375 diameter.

Cable Clamp with neoprene cushion. Plated steel construction. And available in .312 and .375 diameter.

Wheel Spacer and Hub Protector. With a wheel bolt circle of 5 x 4.50”/4.75”/5.00” and a .090 thickness. Engineered from high strength steel alloy a...

This valve can be used as a brake shut-off. When energized, the valve will block pressure from reaching downstream. The valve does not prevent fl...

Replacement reservoir clamp Combination Remote & Tandem Remote Master Cylinders. Constructed from durable, high-strength steel.

Wilwood finally has an elegant answer to the question, “Where do I mount my Combination Proportioning Valve1/4” with their new Mounting Bracket Kit...

Hardware kit for Wilwood Tandem Master cylinders. Contains: Fittings, cap screws, dust boot and eyelet for 7/8” and 15/16” Mustang master cylinders.

Hardware kit for Wilwood Tandem Master cylinders. Contains: Fittings, cap screws and spacer for 1.00” and 1 1/8th cylinders.

Hardware kit for Wilwood Tandem Master cylinders. Contains: Fittings, cap screws and dust boot for 7/8” and 15/16” cylinders

Wilwood finally has an elegant answer to the question, “Where do I mount my Combination Proportioning Valve1/4” with their new Mounting Bracket Kit...

Wilwood's Master Cylinder Bench Bleeding kit contains all fittings and hoses to properly bench bleed your master cylinder, either tandem or single ...

Replacement remote reservoir inlet adapter for Comapct Remote Master Cylinders. Constructed from durable, high-strength plastic.